Sure enough! I had been looking at a mix of 110 and 220v motor/drives. Now that you pointed that out, it looks like none of the 400W under-$100 motors are 110. There are 550W (3/4HP) motors for $120, and 750W (1HP) for $150.
Hmmm. -- Ralph ________________________________________ From: John Bald [[email protected]] Sent: Monday, July 9, 2018 10:55 AM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] brushless sewing machine motors That particular ad says "US Stock", but looks like it's 220v 50hz which won't work in the US On Monday, July 9, 2018 12:09 AM, Ralph Stirling <[email protected]> wrote: Anybody ever checked out this type of motor for CNC use? Seems like a pretty good deal for 400W with a drive, at least for a small spindle motor. I'm wondering how easily the drive could be hacked for LCNC position control. There are a lot of different motors and power ratings on ebay in this category. https://ebay.com/itm/253624140119 -- Ralph ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
