> On 7. Oct 2018, at 22:56, Gene Heskett <ghesk...@shentel.net> wrote:
>
> On Sunday 07 October 2018 15:07:45 Rene Hopf via Emc-users wrote:
>
>> thats related to multi spindle, the conversion script seems to be
>> incomplete. the message about joint-axis is confusing, it just
>> converts the spindle names. rename the pins to
>> halui.spindle.0.whatever
>> if you depend on spindle-at-speed, dont update, as that is currently
>> broken...
>
> If its derived from a wcomp, reading a spindle encoder it should be okay?
> I didn't check that for g33.1 or g76 functions on either machine, too
> hot to muck around much in the shed with TLM. I have an led on that
> signal on TLM, and it did seem to be working.
>
> Or is this actually internal to motion?
the spindle-at-speed pin is affected.
https://github.com/LinuxCNC/linuxcnc/issues/504
<https://github.com/LinuxCNC/linuxcnc/issues/504>
>
>> http://linuxcnc.org/docs/devel/html/man/man1/halui.1.html#PINS
>>
>>> On 7. Oct 2018, at 20:53, Gene Heskett <ghesk...@shentel.net> wrote:
>>>
>>> And it wants to do it on both machines I've updated today.
>>>
>>> Checking the file, it was new yesterday.
>>>
>>> Is it safe? Joints merger has been done once, and I had to do a fair
>>> bit of sorting to recover.
>>>
>>> Doesn't look as if its safe:
>>>
>>> gene@lathe:~/linuxcnc/configs/my_LinuxCNC_machine2$ linuxcnc -l
>>> LINUXCNC - 2.8.0-pre1-3898-g6c5404a
>>> Machine configuration directory
>>> is '/home/gene/linuxcnc/configs/my_LinuxCNC_machine2'
>>> Machine configuration file is 'my_LinuxCNC_machine2.ini'
>>> Starting LinuxCNC...
>>> .
>>> Found file(REL): ./my_LinuxCNC_machine2.hal
>>> ./my_LinuxCNC_machine2.hal:452: Pin 'halui.spindle.forward' does not
>>> exist
>>> Shutting down and cleaning up LinuxCNC...
>>> Running HAL shutdown script
>>> LinuxCNC terminated with an error. You can find more information in
>>> the log:
>>> /home/gene/linuxcnc_debug.txt
>>> and
>>> /home/gene/linuxcnc_print.txt
>>> as well as in the output of the shell command 'dmesg' and in the
>>> terminal
>>>
>>> Just one comment, that pin does exist in both the old and new
>>> versions of my_LinuxCNC_machine2.hal.
>>>
>>> So something has renamed, or deleted that pin. And likely other
>>> associated pins since halui.spindle.reverse is next in that list.
>>>
>>> Fixes?
>
> --
> Cheers, Gene Heskett
> --
> "There are four boxes to be used in defense of liberty:
> soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> Genes Web page <http://geneslinuxbox.net:6309/gene
> <http://geneslinuxbox.net:6309/gene>>
>
>
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net <mailto:Emc-users@lists.sourceforge.net>
> https://lists.sourceforge.net/lists/listinfo/emc-users
> <https://lists.sourceforge.net/lists/listinfo/emc-users>
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
