Pretty much exactly that. Plastic ball valves for PVC water pipe would be
cheaper, unless you're building a table for heavy industrial use and will be
turning the valves a large number of times per year.
On Sunday, October 7, 2018, 4:34:21 PM MDT, Leonardo Marsaglia
<[email protected]> wrote:
Hello Gregg,
Something like this is what you have in mind?
http://www.phoenixcnccreations.com/our_shop_gallery/Vacuum%20System/2%20vac%206%20zone%20plenum_ball%20valves4.jpg
It's a nice feature, and seems cheap and not hard to implement. That's
probably the way I'll do it.
El sáb., 6 oct. 2018 a las 18:07, Gregg Eshelman via Emc-users (<
[email protected]>) escribió:
> You could make the vacuum table with several zones, connected with a PVC
> pipe manifold and ball valves to close off sections you're not using. That
> would be easier than keeping stuff around to lay over unused sections of
> the table.
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
