On Wednesday 28 November 2018 06:31:30 andy pugh wrote: > On Wed, 28 Nov 2018 at 04:26, Gene Heskett <ghesk...@shentel.net> > wrote: > > And that brought cr1 back on, and an attempt to run LCNC now shows two > > > gpio's as serial tx and rx, but doesn't show anything that from my > > understanding, should be there on that subcircuit. And should there > > not be 2 such on adjacent pins pairs, a total of 3 per 7i76? > > If the HAL pins show as TX and RX and have not reverted to GPIO then > that means that they have found the 7i76 smart-serial channel. > > You won't see the other ones without a smart-serial remote on the 7i76 > expansion connection.
Hmm, makes sense. > The 7i76 field-IO doesn't show in dmesg. You should see it with halcmd > show pin. I hadn't considered that, thanks. And it works. Lots and lots of i/o. Saved and printed. Should be helpfull but will need translation from gpio-nn to tb-#-# to use. Go feed the missus and input some more coffee and get to it, starting with getting the other bob for 5i25-p2 powered. Looks like this will get me going as soon as another standoff kit gets here, promised tomorrow evening. The box is 3" tall, so I'll mount the cards about 2" high, and take all the cableing to the machine out under the boards, so the terminals are not buried in wire. And I'll have a kajillion of these to fix: twopass: Error in file ./GO704fast.hal: setting parameter 'hm2_5i25.0.gpio.007.is_output' to 'true' parameter or pin 'hm2_5i25.0.gpio.007.is_output' not found Hmmm, ack that printout, it almost exist, but is_output does not, only invert and open_drain. Since that is also the stepgen #3 step output, that line can be nuked in favor of an open_drain, which is how I've driven the steppers anyway. I take it the ability to change a gpio's direction was lost in the 7i76? Abd I just discovered that none of the 7i76 stuffs made it to the save all output. I guess I'll toss these printouts and make the pin file with screen copy pasted to geany, which added 60 more lines to the printout. Laborious, but I'll get there. Thank you Peter. Now for that 2nd cuppa. And feed the missus. Then make more coffee, this is yesterdays leftovers. :) -- Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users