i did move encoder cable to another drive , no change number in lcnc, and move another encoder cable to z drive and number changing.
it is motor encoder not good. that is not repair able so need new/another ac servo motor nema34 On Sun, Mar 3, 2019 at 3:54 PM a k <pccncmach...@gmail.com> wrote: > hi > changing number are in linuxcnc where x ok y ok and z axis encoder does > not changing. > my drive linze and led on it ok. > i will swap encoder cable to another drive to see if any change. > > On Sun, Mar 3, 2019 at 3:38 PM andy pugh <bodge...@gmail.com> wrote: > >> On Sun, 3 Mar 2019 at 23:26, a k <pccncmach...@gmail.com> wrote: >> >> > I just found that encoder on my servomotor stop working. >> > I turn shaft and number does not changing. >> > Enverything was good yesterday . >> > Today not. >> > It is servodynamic motor. Company not exist any more. >> >> Maybe the LED has died. Is there any current flow on the power supply >> to the encoder? >> >> -- >> atp >> "A motorcycle is a bicycle with a pandemonium attachment and is >> designed for the especial use of mechanical geniuses, daredevils and >> lunatics." >> — George Fitch, Atlanta Constitution Newspaper, 1916 >> >> >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users