Aram, I just searched for aerodynamics. I called the telephone number on the web page. Servo dynamics' phone system answered and told me if I knew my party's extension I could dial it at any time. I hung up at that time. It looks as if the report of their demise is a little premature. Thanks Stuart
On Sun, Mar 3, 2019, 5:26 PM a k <pccncmach...@gmail.com> wrote: > Hi > I just found that encoder on my servomotor stop working. > I turn shaft and number does not changing. > Enverything was good yesterday . > Today not. > It is servodynamic motor. Company not exist any more. > I did not run it whole a lot. > How I can check that it is encoder motor and not a drive? > > Also, if I find similar size nema 34 , do I need to return again? > > Thanks > Aram > > > > > > > > > > On Mon, Jan 28, 2019, 1:59 PM Thaddeus Waldner <thadw...@gmail.com> wrote: > > > Hi, > > > > I have a small machine with spindle motor driven by a Toshiba VFS-11 vfd. > > I currently have a forward and reverse signal controlling the drive but I > > need to be able to control the speed. From what I’ve seen, this drive > > connects digitally via the modus protocol, and someone actually wrote a > > driver for this drive for LinuxCNC. Can someone direct me to a list of > > instructions on how to get it set up that way? > > > > Thanks, > > Thaddeus Waldner > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users