One might argue that this is a much better fit

i.MX 8

Reason #1: Not TI

Reason# 2

    Core Complex #1: 4x Cortex-A53
    Core Complex #2: 2x Cortex-A72
    2x Cortex-M4F for real time
    1x HIFI4 DSP

https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8-family-arm-cortex-a53-cortex-a72-virtualization-vision-3d-graphics-4k-video:i.MX8

Reason #3:
With Vivante GC7000VX with open 3d accel drivers

And if you need to expand you have PCIe and GB Ethernet + SPI for
coprocessors or FPGA's.

On 6/13/19 11:15 AM, John Dammeyer wrote:
> We've been discussing various kinds of modules to make a dedicated LinuxCNC 
> processor.  This may just be it.
> https://beagleboard.org/blog/2019-05-16-beaglebone-ai-preview
>
> https://beagleboard.org/ai
>
> With 4 PRUs to deal with the hardware the biggest issue might be access to 
> enough pins to do everything one needs.
>
> John
>
>
>
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to