On Saturday 21 September 2019 10:15:15 Gene Heskett wrote: > On Friday 20 September 2019 19:45:35 Gene Heskett wrote: snipped TL;DR stuffs, thought I did first time, sorry > > > >> Done but me somewhat confused. It built bcm2711-rpi-4-b.dtb > > > >> which is in the /boot directory, but built it > > > >> in > > > >> /media/pi/workspace/kernel/linux/arch/arm/boot/dts/bcm2711-rpi- > > > >>4- b. dtb , which is nearly the same location it built zImage > > > >> in. > > > >> > > > >> There is an install.sh in that /arch/arm/boot directory, but it > > > >> needs at least 3 arguments. Anyboy got an idea what to pass to > > > >> it? > > Getting no answers, I copied arch/arm/boot/zImage to /boot/kernel-rt, > and added a line to /boot/config.txt: > kernel=kernel-rt > and rebooted it from here, starting a ping so I know if it booted. > did, ssh -Y pi@rpi4, waded thru key msgs and logged in. > #>uname -a reports: > Linux rpi4 4.19.71-rt24-v7l+ #1 SMP PREEMPT RT Fri Sep 20 14:17:36 EDT > 2019 armv7l GNU/Linux > Looks like success to me. > cd /media/pi/slash/linuxcnc-master/src > #> ./autogen.sh (no replies) > #./configure --with-realtime=uspace gets to this: > checking for module installation directory... configuring for > run-in-place > /media/pi/slash/linuxcnc-master/rtlib > checking for glib... configure: error: no -- required until somebody > makes glib optional > Looks like wayland has struck, this is: cat /etc/debian_version (new way of determining version) 10.1
Whats next? locate says theres glib-2.0 installed. /usr/lib/arm-linux-gnueabihf/glib-2.0, and /usr/lib/arm-linux-gnueabihf/libglib-2.0.so.0 Is it useable? Will a fresh git clone help, that one's about 3 weeks old. Have a shot at a fresh copy: git clone git://github.com/linuxcnc/linuxcnc.git linuxcnc-dev And I get to the exact same bailout msg from ./configure --with-realtime=uspace checking for module installation directory... configuring for run-in-place /media/pi/slash/linuxcnc-dev/rtlib checking for glib... configure: error: no -- required until somebody makes glib optional So, what do I do next? Thanks all. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
