> On Sat, 21 Mar 2020 at 18:32, Nicklas Karlsson <[email protected]> > wrote: > > > > *rene-dev <https://github.com/rene-dev> * commented on May 7, 2018 > > > <https://github.com/rene-dev/stmbl/issues/91#issuecomment-386898077> > > > > > > IRAM256-1567A2 or IRAM256-1067A2 can be used as replacement, but they > > > only have 15 and 10A, but thats plenty for most servos. > > > they are still available at mouser. > > > > > > and I see they are near 26bucks at > > > > > > https://m.th.aliexpress.com/item/32839176520.html > > > > > > and later said > > > > > > > > > *rene-dev <https://github.com/rene-dev> * commented on Jun 21, > > > 2018 > > > < > > https://github.com/rene-dev/stmbl/issues/91#issuecomment-399050388> > > > > > > All A2 models seem to be out of stock now. The A models can be bodged in: > > > > Decided discrete transistor was a good idea, have sometimes been in doubt > > but then looking on availability of components it feels like a really good > > choice. Have prototype boards but nothing I dare to sell yet. > > > > > > Regards Nicklas Karlsson > > > > > I looked at this the last time it was discussed and thought these might be > a good choice. And re-lay the board; > > https://za.rs-online.com/web/p/motor-driver-ics/1339905/
I am sure this module work fine as long as "size" is suitable for motor voltage and current. > https://za.rs-online.com/web/p/microcontrollers/7238978/ That's an excellent Micro controller, have similar on my boards, there are plenty to chose from. Nicklas Karlsson _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
