On 07/03/2020 08:50 PM, Gene Heskett wrote:
If you can get it truly lox clean. Or you can find one marked "permanent"
which has solvents that can penetrate the lube film.
Sharpies have, I believe MEK in them, and so will leave a
good mark on surfaces with a trace of oil.
Won't work on cast iron due to the porosity making it almost
impossible to get all the oil off, but should work quite
well on machined steel parts.
Jon
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
