I switched to an ethernet based mesa karte it is nearly impossible to finde a PCI or PCIe parport card that support Real EPP
> Am 10.08.2020 um 20:24 schrieb dave engvall <dengv...@charter.net>: > > Hi, > > Fussing with a pci pport card; 8875F based connected to a 7i43. > With 50 pin connectors to the left led's are Y R R > > I don't seem to get better at this as I age. :-( > > Any help will be greatly appreciated! > > Thanks in advance. > > Dave > > LINUXCNC - 2.7.15 > Machine configuration directory is > '/home/dave/linuxcnc/configs/by_interface.mesa.hm2-servo' > Machine configuration file is '7i43-small.ini' > Starting LinuxCNC... > Found file(REL): ./hm2-servo.hal > hm2: loading Mesa HostMot2 driver version 0.15 > hm2_7i43: loading HostMot2 Mesa 7i43 driver version 0.3 > hm2_7i43: /DONE is not low after CPLD reset! > hm2_7i43: /DONE is not low after CPLD reset! > Shutting down and cleaning up LinuxCNC... > hm2: unloading > LinuxCNC terminated with an error. You can find more information in the log: > /home/dave/linuxcnc_debug.txt > > > bits and pieces from dmesg: > > [ 4.526991] lp: driver loaded but no devices found > [ 4.637563] ppdev: user-space parallel port driver > [ 4.646072] parport_pc: ITE8875 found (1P) > [ 4.648310] parport0: PC-style at 0x1200 [PCSPP,TRISTATE,EPP] > [ 4.746433] lp0: using parport0 (polling). > [ 4.747949] parport_pc: ITE 8872 parallel port: io=0x1200 > > [ 4.753978] parport1: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] > [ 4.754034] parport1: irq 7 detected > [ 4.850046] lp1: using parport1 (polling). > [ 4.526991] lp: driver loaded but no devices found > [ 4.637563] ppdev: user-space parallel port driver > [ 4.646072] parport_pc: ITE8875 found (1P) > [ 4.648310] parport0: PC-style at 0x1200 [PCSPP,TRISTATE,EPP] > [ 4.746433] lp0: using parport0 (polling). > [ 4.747949] parport_pc: ITE 8872 parallel port: io=0x1200 > > [ 4.753978] parport1: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] > [ 4.754034] parport1: irq 7 detected > [ 4.850046] lp1: using parport1 (polling). > ./hm2-servo.hal:43: /usr/bin/rtapi_app exited without becoming ready > ./hm2-servo.hal:43: insmod for hm2_7i43 failed, returned -1 > Shutting down and cleaning up LinuxCNC... > hm2: unloading: > > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users