Hi,
Fussing with a pci pport card; 8875F based connected to a 7i43.
With 50 pin connectors to the left led's are Y R R
I don't seem to get better at this as I age. :-(
Any help will be greatly appreciated!
Thanks in advance.
Dave
LINUXCNC - 2.7.15
Machine configuration directory is
'/home/dave/linuxcnc/configs/by_interface.mesa.hm2-servo'
Machine configuration file is '7i43-small.ini'
Starting LinuxCNC...
Found file(REL): ./hm2-servo.hal
hm2: loading Mesa HostMot2 driver version 0.15
hm2_7i43: loading HostMot2 Mesa 7i43 driver version 0.3
hm2_7i43: /DONE is not low after CPLD reset!
hm2_7i43: /DONE is not low after CPLD reset!
Shutting down and cleaning up LinuxCNC...
hm2: unloading
LinuxCNC terminated with an error. You can find more information in the
log:
/home/dave/linuxcnc_debug.txt
bits and pieces from dmesg:
[ 4.526991] lp: driver loaded but no devices found
[ 4.637563] ppdev: user-space parallel port driver
[ 4.646072] parport_pc: ITE8875 found (1P)
[ 4.648310] parport0: PC-style at 0x1200 [PCSPP,TRISTATE,EPP]
[ 4.746433] lp0: using parport0 (polling).
[ 4.747949] parport_pc: ITE 8872 parallel port: io=0x1200
[ 4.753978] parport1: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[ 4.754034] parport1: irq 7 detected
[ 4.850046] lp1: using parport1 (polling).
[ 4.526991] lp: driver loaded but no devices found
[ 4.637563] ppdev: user-space parallel port driver
[ 4.646072] parport_pc: ITE8875 found (1P)
[ 4.648310] parport0: PC-style at 0x1200 [PCSPP,TRISTATE,EPP]
[ 4.746433] lp0: using parport0 (polling).
[ 4.747949] parport_pc: ITE 8872 parallel port: io=0x1200
[ 4.753978] parport1: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[ 4.754034] parport1: irq 7 detected
[ 4.850046] lp1: using parport1 (polling).
./hm2-servo.hal:43: /usr/bin/rtapi_app exited without becoming ready
./hm2-servo.hal:43: insmod for hm2_7i43 failed, returned -1
Shutting down and cleaning up LinuxCNC...
hm2: unloading:
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users