On 9/16/20 12:09 AM, Chris Albertson wrote:
Fusion 360 can generate g-code for mills and lathes. It's free even for
commercial use until you make $50K using it.
Fusion is a little bit like Freecad but is more complete and better
supported as you would expect of a product from Autodesk.
I have heard about that one. does it run on Linux too?
On Tue, Sep 15, 2020 at 9:39 PM R C <cjv...@gmail.com> wrote:
Hello,
I have been using freecad for designing parts, and then milling them on
a sherline mill, getting the hang of that a little bit.
I have a lathe too, that works with CNC linux, but noticed heard, that
you can't really make parts, or g-codes, with it for a lathe.
What wold be a good choice for designing, simple, parts for a lathe,
that will create g-code for it?
thanks,
Ron
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users