On 9/16/20 12:26 PM, Gene Heskett wrote:
On Wednesday 16 September 2020 10:02:25 R C wrote:
yesterday, I noticed some electronics in my little lathe fried/died,
after I fix that I'll try to use it.
Everybody knows this stuff runs on smoke & mirrors, so what did you do to
break the mirror & let the smoke out?
btw: I think that the high summer temperatures, it either being humid,
or with AC dry and static didn't help much either, that
and some thunderstorms in the mix .
up here where I live, we constantly have cooling issues with computing
equipment etc, (there's 30% less air than at sea level), there
were several 'cooling incidents' around that time, where I work
On 9/16/20 7:45 AM, andy pugh wrote:
On Wed, 16 Sep 2020 at 14:45, R C <cjv...@gmail.com> wrote:
that sounds like something I had in mind, well, either that or just
design a part with "something"
You can try it out, there is a gmoccapy simulator sample package
using it. (Which, thinking about it, means that the base files must
be in LinuxCNC now)
Which further means that I ought to fix the bug that one of the
feed-per-rev boxes doesn't work.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users