On Tue, 20 Oct 2020 at 10:22, Gene Heskett <ghesk...@shentel.net> wrote:
> [485180.220310] hm2/hm2_5i25.0: IO Pin 008 (P3-05): PWMGen #0, pin Out1 > (Dir or Down) (Output) > [485180.220317] hm2/hm2_5i25.0: IO Pin 009 (P3-06): PWMGen #0, pin Out0 > (PWM or Up) (Output) > > Which is NOT where they actually are on the 7i76D! This leads me to suspect that you are not using the firmware that you think you are, or that you are deliberately using a non-7i76 firmware. The 7i76 does not use _any_ PWM signals, the spindle interface is part of the smart-serial subsystem. I would expect those PWM signals to be replacing the stepgen4 outputs. So it is all documented, if you allow for the fact that you are using an incorrect (or at least custom) firmware. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users