Good morning Gene. I would be interested in seeing how you are metering/monitoring the spindle overshoot past the turnaround command. Only if you are interested in sharing.
--J. Ray Mitchell Jr. jrmitche...@gmail.com "Good enough is the enemy of excellence"author unknown On Mon, Nov 9, 2020 at 3:37 AM Gene Heskett <ghesk...@shentel.net> wrote: > On Monday 09 November 2020 06:12:02 andy pugh wrote: > > > On Mon, 9 Nov 2020 at 11:09, Gene Heskett <ghesk...@shentel.net> wrote: > > > Does this sound like a worthwhile bit of research? > > > > Not to me. I just accept finishing the holes out with a bottoming tap > > by hand. > > I'd like to automate that, but changing the tap in the machine would > require an index consistent from tap to tap. Something we could maybe > insert into the tool table if each tap had a truly unique serial number. > > Not practical with current tap making tech. And no room in the tool table > for the new data. > > So hand finishing is likely the best option at the present time. > > Thanks Andy. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > If we desire respect for the law, we must first make the law respectable. > - Louis D. Brandeis > Genes Web page <http://geneslinuxbox.net:6309/gene> > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users