I was just wondering if there were any examples of how the GRAFCET programming might be used in Classiclader. Thought that if I saw how it might be used I might then understand exactly what it was then. And if any one had actually used it with Linuxcnc to know that it actually works with our version of CL.
Thanks for the links Andy I'll look them over and see if I can actually understand any of it. Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -----Original Message----- From: andy pugh <[email protected]> Sent: Tuesday, January 26, 2021 9:23 AM To: Enhanced Machine Controller (EMC) <[email protected]> Subject: Re: [Emc-users] Classicladder Sequential On Tue, 26 Jan 2021 at 06:07, Dave Cole <[email protected]> wrote: > > Do you mean writing a sequencer in Classic Ladder? > As in step logic? CL supports state based sequential logic, using GRAFCET. http://www.linuxcnc.org/docs/2.5/html/ladder/classic_ladder_es.html#_grafcet_programming There are some "example_sequential" files on the (a?) classicladder github. https://github.com/cz172638/classicladder-1/tree/main/projects_examples -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
