On Thu, 15 Apr 2021, andrew beck wrote:
Date: Thu, 15 Apr 2021 15:15:56 +1200
From: andrew beck <andrewbeck0...@gmail.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Subject: [Emc-users] wiring up mesa ency encoder
Hey guys
looking for info on how to wire up a mesa ency encoder card to my vfd.
I have a encoder card that outputs 12v to the encoder that I have (which is
also a 12 v encoder) but would like to split the encoder pulses off to my
7i77 as well as back to schiender altivar 71 vfd.
the vfd does output the encoder pulses but won't output the z pulse so I am
thinking of using the ENCY card to allow me to tap in to signals.
couple of questions
1 does the ency card handle 12v
No, the ENCY supports 5V single ended or differential signals
2 what is the best way to wire it up. I have a standard quad encoder but
with push pull outputs
regards
Andrew
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
