On Sun, 25 Apr 2021, Ralph Stirling wrote:
Date: Sun, 25 Apr 2021 17:43:12 +0000 From: Ralph Stirling <ralph.stirl...@wallawalla.edu> Reply-To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> To: "emc-users@lists.sourceforge.net" <emc-users@lists.sourceforge.net> Subject: [Emc-users] Analog servo systemGetting back to my Realmeca C2 mill retrofit now. I'm giving up getting the Fagor 8050 control going, so plan on retrofitting with LCNC. I'd like to use ethernet to a NUC-type computer. I'm looking at this chain of boards, but am not sure about compatibility of some: Mesa 7i94 eight-port smart serial to Ethernet -> 7i69 48 i/o sserial -> 7i33 analog servo (have already) -> 7i84 32i/16o sserial -> 7i73 pendant sserial My main concern is if the 7i33 will work with the 7i69, and if latency will become an issue with everything running over sserial and ethernet. The 7i94 is in stock at Mesanet, and the 7i69 and 7i73 are in stock at Mesaus. Some other approaches, like the 7i97, are not in stock. Thanks, -- Ralph
I have a 7I97 with one bad analog channel for free if you want it Peter Wallace Mesa Electronics _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
