On 5/4/21 2:46 PM, andy pugh wrote:
On Tue, 4 May 2021 at 20:06, Ed <ate...@mwt.net> wrote:
no such animal as lspci.
Try "sudo lspci". Linux denies all knowledge of commands that you
don't have the rights to. I have no idea why.
Comes back as "command not found "
Is there another good way to find the ports?
cat /proc/ioports
if it is an onboard one.
All ports shown have zero's.
This is on a fresh down load of 2.8.0 on a Dell Optiplex 755.
Maybe a bad install?
Ed.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users