Many motherboards still have an "ISA Bus" that has a few onboard peripherals
such as a parallel port and an RS232C port and some other things that work fine
slowly.
On Wednesday, May 5, 2021, 7:54:33 AM MDT, Todd Zuercher
<[email protected]> wrote:
It won't show a standard onboard motherboard port, because those are not on
the PCI bus.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-----Original Message-----
From: John Dammeyer <[email protected]>
Sent: Tuesday, May 04, 2021 8:26 PM
To: 'Enhanced Machine Controller (EMC)' <[email protected]>
Subject: Re: [Emc-users] Can't find the PP. Where is lspci or equiv ?
[EXTERNAL EMAIL] Be sure links are safe.
> From: Jon Elson [mailto:[email protected]]
> >
> >
> On some installs, for some reason, lspci is not listed in the right
> library, and you have to use /sbin/lspci
>
> I have no idea why, might be a Debian idea.
>
> You DO have to run it under sudo or with privileges to see all the
> details of devices, but the basic info of device type will show
> without sudo.
>
> Jon
I thought I'd try that on my LinuxCNC system. With or without sudo it does
print a list of all the devices but it doesn't tell me the actual port address
of the standard port on the machine (0x378) which I know because when I dual
boot it into MACH3 instead of Linux and move the parallel port cable from the
MESA to the back of the machine it works with that address.
I haven't run it with the back of the machine in Linux for a while but the hal
file uses cfg=0 for the standard port and when I had a second PCI card
installed it was cfg=0x2000
John
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
