Latest github version. Sent from my Samsung S10
-------- Original message --------From: Ralph Stirling
<ralph.stirl...@wallawalla.edu> Date: 2021-06-11 11:04 a.m. (GMT-08:00) To:
"Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Subject:
Re: [Emc-users] Pi4 issues with MESA 7i92H Old version of mesaflash perhaps?On
Jun 11, 2021 10:06 AM, John Dammeyer <jo...@autoartisans.com> wrote:CAUTION:
This email originated from outside the Walla Walla University email system.>
From: Ralph Stirling [mailto:ralph.stirl...@wallawalla.edu]>> I have no problem
using 192.168.1.1 for eth0 on pi4 with 7i92.I don't either with LinuxCNC moving
motors. But it's the mesaflash software that is having an issue. But only on
a Pi. I've downloaded the software from github on a PC, Beagle and Pi4. Only
on the Pi4 does it have issues.Now I can use the PC or the Beagle to flash the
appropriate pin file into the Pi4 but that's not really the point here. Very
puzzled.John>> On Jun 11, 2021 9:30 AM, Sam Sokolik <samco...@gmail.com>
wrote:> CAUTION: This email originated from outside the Walla Walla University
email system.>>> That would be something to try.. Maybe mesaflash doesn't know
how to> handle the 192.168.1.1 ip address? Set the pie to something else like>
192.168.1.10>> On Fri, Jun 11, 2021 at 11:25 AM Mark Wendt
<wendt.m...@gmail.com> wrote:>> > On Fri, Jun 11, 2021 at 12:09 PM John
Dammeyer <jo...@autoartisans.com>> > wrote:> >> > > Sam,> > > Here's the
ifconfig output generated from putty running on my WIN-7> > > workstation via
remote desktop from my WIN-10 ZBook. Ethernet cable from> > > Pi4 to 7i92 is
2' long.> > >> > > And with or without LinuxCNC running this is what I get:> >
> pi@linuxcnc:~ $ cd mesaflash> > > pi@linuxcnc:~/mesaflash $ sudo ./mesaflash
--device 7i92 --readhmid> > > lbp16_access.send_packet: Operation not
permitted> > > Aborted> > >> > > John> > >> > > pi@linuxcnc:~ $ ifconfig> > >
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500> > > inet
192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255> > > ether
dc:a6:32:1e:30:f1 txqueuelen 1000 (Ethernet)> > > RX packets 29442387
bytes 2826463726 (2.6 GiB)> > > RX errors 0 dropped 0 overruns 0
frame 0> > > TX packets 58886151 bytes 1122489823 (1.0 GiB)> > >
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0> > >> > > lo:
flags=73<UP,LOOPBACK,RUNNING> mtu 65536> > > inet 127.0.0.1 netmask
255.0.0.0> > > inet6 ::1 prefixlen 128 scopeid 0x10<host>> > >
loop txqueuelen 1000 (Local Loopback)> > > RX packets 595 bytes
40144 (39.2 KiB)> > > RX errors 0 dropped 0 overruns 0 frame 0> > >
TX packets 595 bytes 40144 (39.2 KiB)> > > TX errors 0 dropped
0 overruns 0 carrier 0 collisions 0> > >> > > wlan0:
flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500> > > inet
192.168.0.97 netmask 255.255.255.0 broadcast 192.168.0.255> > > inet6
fe80::9d66:1b85:f539:da50 prefixlen 64 scopeid 0x20<link>> > > ether
dc:a6:32:1e:30:f2 txqueuelen 1000 (Ethernet)> > > RX packets 11119
bytes 3535970 (3.3 MiB)> > > RX errors 0 dropped 0 overruns 0 frame
0> > > TX packets 3108 bytes 415864 (406.1 KiB)> > > TX errors
0 dropped 0 overruns 0 carrier 0 collisions 0> > >> > > pi@linuxcnc:~ $> >
>> >> > Do you have any other network devices on the 192.168.1.x network? The>
> 192.168.1.1 address is usually reserved for routers in that subnet.> >> >
Mark> >> > _______________________________________________> > Emc-users mailing
list> > Emc-users@lists.sourceforge.net> >
https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Femc->
users&data=04%7C01%7Cralph.stirling%40wallawalla.edu%7Cc116f028f6ee43e610df08d92cf63ad6%7Cd958f048e43142779c8>
debfb75e7aa64%7C0%7C0%7C637590258342182689%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLC>
JBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=N5XTffg5bbWkolc%2FRmAIrAAMc6JWGk6iNLmN0Nz18%2BU%3D&res>
erved=0> >>> _______________________________________________> Emc-users
mailing list> Emc-users@lists.sourceforge.net>
https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Femc->
users&data=04%7C01%7Cralph.stirling%40wallawalla.edu%7Cc116f028f6ee43e610df08d92cf63ad6%7Cd958f048e43142779c8>
debfb75e7aa64%7C0%7C0%7C637590258342182689%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLC>
JBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=N5XTffg5bbWkolc%2FRmAIrAAMc6JWGk6iNLmN0Nz18%2BU%3D&res>
erved=0>> _______________________________________________> Emc-users mailing
list> Emc-users@lists.sourceforge.net>
https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Femc-users&data=04%7C01%7Cralph.stirling%40wallawalla.edu%7C80e7caa73bba49fbd7a608d92cfb3513%7Cd958f048e43142779c8debfb75e7aa64%7C0%7C0%7C637590279707645822%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=yZQam%2FPst8b%2FYnuTxqyxXuohcFtZYY2idlYffoA%2B71w%3D&reserved=0_______________________________________________Emc-users
mailing
listEmc-users@lists.sourceforge.nethttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Femc-users&data=04%7C01%7Cralph.stirling%40wallawalla.edu%7C80e7caa73bba49fbd7a608d92cfb3513%7Cd958f048e43142779c8debfb75e7aa64%7C0%7C0%7C637590279707645822%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=yZQam%2FPst8b%2FYnuTxqyxXuohcFtZYY2idlYffoA%2B71w%3D&reserved=0_______________________________________________Emc-users
mailing
listEmc-users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
