> From: Ralph Stirling [mailto:ralph.stirl...@wallawalla.edu] > I don't think this is his problem, since his rpi Linuxcnc talks to the 7i92 > just fine. Only mesaflash is having trouble. > > Is there any difference between a 7i92 and a 7i92h? I have a straight 7i92 > with one 2x13 and one db25. > Have you tried explicitly specifying --addr 192 168.1.121? > > -- Ralph >
There is no electrical difference. Just one DB connector and one header for the non H variety. It turns out setting the address as --addr 192.168.1.121 or if the W5 and W6 are changed to reflect EEROM IP address of default 10.10.10.10 then all commands must have --addr 10.10.10.10. Reading the manual again it appears that --addr is only needed if the default 192.168.1.121 is not in use on the 7i92. That's incorrect with a Pi4. It's correct with a PC and a Beaglebone. John _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
