Well, we could lose the 20ft long Bosch Rexroth linear rails and bearings. (Which I'm guessing aren't particularly cheap either.)
Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -----Original Message----- From: andy pugh <bodge...@gmail.com> Sent: Wednesday, July 28, 2021 1:38 PM To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] Metallurgical Advice? [EXTERNAL EMAIL] Be sure links are safe. On Wed, 28 Jul 2021 at 18:28, Todd Zuercher <to...@pgrahamdunn.com> wrote: > Is there any hope of repairing the table? Are we going to have to replace > the whole table? Could the crack be welded, or is that a bad idea? It's probably a bad idea, but I would think that it is worth at least a try. You don't have a lot to lose. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
