It looks like the question is answered. I use a magnetic sensor that is inside a housing with M12x1 threadsm completely different.
You will need to re-compile Merlin with setting for the bed height sensor enabled. The new firmware image will be larger. Make sure your controller board has enough memory. On Thu, Aug 19, 2021 at 9:14 AM Gene Heskett <[email protected]> wrote: > Greetings; > > I'm in the process of rebuilding the hot end of a failed CR10-S Pro V2, > as the hot end supplied with cannot long tolerate PETG temps. Its too > hot for the capriorn tubing when it goes all the way to the butt end of > the nozzle. > > The E3D based stuff claims to goto 300-350C, and there is such an all > metal hot end on the prusa Mk3S, and after refitting a new heat break, > its working with PETG quite well. > > Haldis is making a volcano version of an E3D hot end, and selling the > whole kit for $40 on amazon. > > I've designed, and am printiing the final fine tuned copy of a mount that > fits on top of that, to support the Sherpa extruder driver, one of the > lightest direct drives extant. So that will be assembled on the carriage > in another 45 minutes. > > That leaves 2 open bolt holes above the side fans and the ones on the > left could use used to fix the BLTouch in a similar position to where it > was originaly. The BLTouch is the std nylon stinger model. But the > volcano head is around 5 to 8mm taller than a stock hot end, meaing the > BLTouch needs lowered by that amount. > > What I need is the measurement from the base of the BLTouch, to the glass > bed surface at the point of the BLTouchs triggering. Do you know of > someplace (a URL) with drawings that define that distance? That would > speed the design of a mounting for it in openscad by at least a day. > > Thanks Chris. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > If we desire respect for the law, we must first make the law respectable. > - Louis D. Brandeis > Genes Web page <http://geneslinuxbox.net:6309/gene> > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Chris Albertson Redondo Beach, California _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
