On Thursday 19 August 2021 13:02:28 Rob C wrote: > https://grabcad.com/library/bl-touch-for-3d-printers-1 > > https://www.geeetech.com/wiki/index.php/3DTouch_Auto_Leveling_Sensor > > any use? > Not too, trip point isn't listed, but I did a web search and found a drawing that did have it. Then I made a swag in openscad and made a mount that should trip when the nozzle is around a mm above the glass if I measured everything right. But that wiped out my back, and I hit LJS for dinner. Tomorrow I'll remount the carriage, and start sorting the umbilical cable. Thats a bit complex on a CR10-S Pro V2 as they have a separate junction board on the left end of the X carriage rail. If its not better labeled than most, that will be a basket of rattlesnakes to sort. And its been about 4 months since I took it apart. :-(
Thanks for the effort Chris, it is appreciated. > On Thu, 19 Aug 2021 at 17:14, Gene Heskett <[email protected]> wrote: > > Greetings; > > > > I'm in the process of rebuilding the hot end of a failed CR10-S Pro > > V2, as the hot end supplied with cannot long tolerate PETG temps. > > Its too hot for the capriorn tubing when it goes all the way to the > > butt end of the nozzle. > > > > The E3D based stuff claims to goto 300-350C, and there is such an > > all metal hot end on the prusa Mk3S, and after refitting a new heat > > break, its working with PETG quite well. > > > > Haldis is making a volcano version of an E3D hot end, and selling > > the whole kit for $40 on amazon. > > > > I've designed, and am printiing the final fine tuned copy of a mount > > that fits on top of that, to support the Sherpa extruder driver, one > > of the lightest direct drives extant. So that will be assembled on > > the carriage in another 45 minutes. > > > > That leaves 2 open bolt holes above the side fans and the ones on > > the left could use used to fix the BLTouch in a similar position to > > where it was originaly. The BLTouch is the std nylon stinger model. > > But the volcano head is around 5 to 8mm taller than a stock hot end, > > meaing the BLTouch needs lowered by that amount. > > > > What I need is the measurement from the base of the BLTouch, to the > > glass bed surface at the point of the BLTouchs triggering. Do you > > know of someplace (a URL) with drawings that define that distance? > > That would speed the design of a mounting for it in openscad by at > > least a day. > > > > Thanks Chris. > > > > Cheers, Gene Heskett > > -- > > "There are four boxes to be used in defense of liberty: > > soap, ballot, jury, and ammo. Please use in that order." > > -Ed Howdershelt (Author) > > If we desire respect for the law, we must first make the law > > respectable. - Louis D. Brandeis > > Genes Web page <http://geneslinuxbox.net:6309/gene> > > > > > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
