Hello
Yesterday I built glade 3.8.6 for my Armbian OrangePi+2e.
https://forum.linuxcnc.org/48-gladevcp/33309-glade-3-20-will-not-work-with-linuxcnc-please-follow-this-for-3-8-6?start=10
And found it didnt have the Hal widgets.
Then I noticed that linuxcnc 2.8.1 would not run any glade demos
the error includes
import gtksourceview2 as gtksourceview
No module named gtksourceview2
My needs were for a vbar and I wrote a custom pyvcpwidgets to support it.
Now, hoping to make this new sink edm idea available, I tried to use
glade's vbar.
That works fine on my debian 9 intel desktop but got into trouble on
armbian buster opi+2e.
I tried all day but couldnt crack that last error about gtksourceview2
Is it worth pursuing?
The opi+2e 'allwincnc' is rather unsupported, so changing buster is risky.
(I'm afraid the above instructions included
sudo apt-get update sudo apt-get upgrade
may have trashed the rtpreempt tho lcnc can still run after reboot )
I just have a lot of time invested in it already.
thanks tomp
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
