On Wednesday, 23 March 2022 14:41:23 EDT andy pugh wrote: > On Wed, 23 Mar 2022 at 17:57, gene heskett <[email protected]> wrote: > > dd installed an early 2019 buster image to a 64G u-sd card. > > I have had much better luck with the Pi imager for getting the ISO onto > an SD. > > https://www.raspberrypi.com/software/ > > Maybe try the 64-bit Buster / LinuxCNC image here: > https://drive.google.com/file/d/1sdFvmJx439lZQsqxUZ8LXp5MmouADjQE/view > I've got that coming in, but the pi-imager didn't work on debian 2 years ago, it is apparently written for ubuntu stuff.
And the messages wrapping this dl don't seem to be aware of rpspi.ko, the gpio driver Bertho Stultans(sp?) Wrote, and runs absolutely bulletproof on my pi's to talk to an spi driven 7i90HD card. At 42 megabaud send and rx from the mesa card at 25 megabaud. Fastest interface we have. > > (Link copied > from:https://forum.linuxcnc.org/9-installing-linuxcnc/45212-linuxcnc-o > n-raspberry-pi-4#237299 ) There is a disconnect between the pi folks and the rest of us. Enforced by the pi crowd. Thanks for the link, Andy, I'll give it a try, with dd. The raspi site above serves ununtu & windows only. I did dl the ubuntu version deb, so we'll see if it can be installed on a bullseye system here. Maybe its been improved in the last 2 years? Cheers, Gene Heskett. -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author, 1940) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
