I am not at the machine right now but if memory serves me right, I used G10 L20 P1 Z1.588
Ah! I just saw that P0 is for the active coordinate system. Is P optional? Thaddeus Waldner ________________________________ From: Andy Pugh <bodge...@gmail.com> Sent: Sunday, March 27, 2022 7:55:07 PM To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] Probing > On 28 Mar 2022, at 00:26, Thaddeus Waldner <thadw...@gmail.com> wrote: > > I was able to get this working. Thanks for the help. I ended up using a macro > and modifying G54 Z offset If you use G10 then it will use the current coordinate system. G10 is almost always the correct in to use for this. _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
