Hi All,
I've got an elderly Shumatech DRO-350 and was using it this past week
and the read head on the X axis of my mini mill decided it was time to
give up the ghost. I ordered what looked to be a drop in replacement but
when it arrived, I noticed it had a mini USB connector as it's data
port. The old chinese scales used a plug that had four sprung strips
that lay against four strips in the reader head. I'd been using a cable
I got from Little Machine shop years ago that had that plug on the scale
end, and a 4 pin mini DIN connector on the other that plugged into the
DRO-350. Attached is a picture of the connection lines. Wondering if
anyone knows what the pinout for the mini USB connector on the scale
would be and if it would match up to the lines pictured below on the
mini DIN. If so I can cobble together a cable that has the mini DIN on
one and a mini USB on the other.
Thanks,
Mark
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
