Do you have a precision miter saw like this, or similar? https://toolsandmore.us/stanley-20-800-miter-saw.aspx <-open box sale $29.95
Very thin, fine teeth, minimal set so it cuts a very narrow kerf. As for how many cuts the blade will last cutting carbon fiber??? On Wednesday, November 30, 2022 at 09:07:44 PM MST, gene heskett <ghesk...@shentel.net> wrote: Greetings all; An unusual question. How to cut, neatly, and squarely, a 20mm square carbon fiber tube to length, say 550mm out of an 800mm tube. I'm making a linear rail bearing X axis for two of my 3d printers, I have a die grinder that I can mount in a quick change holder, and a 2" by 30 thou CBN disk and 1/4" arbor, and a 4 jaw chuck on my Sheldon. Do I need to print an 18mm square plug to insert into this tubing to support the 1mm thick tubing walls, or can a relatively light grip be enough to hold it fixed while I turn slow and cut it off with the CBN wheel running at about half line voltage in the die grinder? All I can see in my minds eye is a hugely ragged edge cutting it by hand with a hacksaw. Better ideas anybody? _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
