What is an O-Flutes cutter? -----Original Message----- From: Todd Zuercher [mailto:to...@pgrahamdunn.com] Sent: April 14, 2023 6:52 AM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] Mill ramp angle
I've had great success with 1/4" O-flutes in aluminum. But I spiral those in pretty much exclusively and use HSM style tool paths where the tool never sees more than about 20-30% engagement. (While I've broken lots of 1/4" O-flues, I've never noticed the tip breaking.) Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -----Original Message----- From: Rob C <rclandro...@gmail.com> Sent: Friday, April 14, 2023 9:04 AM To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] Mill ramp angle [EXTERNAL EMAIL] Be sure links are safe. what is the material? what is the endmill material? how many flutes? is it centre cutting tool or non-center cutting end mill? I have always struggled on o-flute endmills and ramp or plunge (breaking the tip :( https://zero-divide.net/?&article_id=4307_plunging-and-ramping-recomendation s-and-techniques On Fri, 14 Apr 2023 at 12:56, Nicklas SB Karlsson <n...@nksb.eu> wrote: > fre 2023-04-14 klockan 12:07 +0100 skrev andy pugh: > > On Fri, 14 Apr 2023 at 10:29, Nicklas SB Karlsson <n...@nksb.eu> wrote: > > > > > > > > Anyone have any suggestion about this? Decrease ramp angle? > > > > > > > Can you spiral down, making a hole slightly less than twice the tool > > diameter, so that only one side of the tool is engaged? > Yes it would be possible. > > If possible to convince CAM module in CAD software I could also plunge > into a hole with a diameter 2mm less than mill. > > > Nicklas Karlsson > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://list/ > s.sourceforge.net%2Flists%2Flistinfo%2Femc-users&data=05%7C01%7Ctoddz% > 40pgrahamdunn.com%7C0a8897a3cab844908e5708db3ce8de16%7C5758544c573f47c > ebee96c3e0806fb43%7C0%7C0%7C638170743088332739%7CUnknown%7CTWFpbGZsb3d > 8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C > 3000%7C%7C%7C&sdata=8YboLOEp9TzsBnJd9rorTnrtXIalE6uXFDUVlnThlA4%3D&res > erved=0 > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users