I have copied thin 2D objects by scanning them, importing the outline
into Illustrator and using the Trace command to trace the outline, then
sent it to VCarve Pro.
I export the toolpath as a GCode file, and use it in LinuxCNC.
Marcus
On 2024-11-13 16:25, fxkl47BF--- via Emc-users wrote:
i place a 2d object on my mill table
i put a pointer in the spindle
i use axis controls to move the spindle from one position to another
at each position i pause and record the coordinates
add a little gcode to these coordinates and i've got a program
is there something that helps to automate this
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
