On Tue, 3 Dec 2024, Leonardo Marsaglia wrote:
Date: Tue, 3 Dec 2024 12:27:33 -0300 From: Leonardo Marsaglia <ldmarsag...@gmail.com> Reply-To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Subject: [Emc-users] Question about mesa 7i53Hello guys, hope you're all doing well I'm in the process of retrofitting a grinder and I'm deciding which MESA combo I'm going to use. I'm going to need to read lots of encoders because I plan to use gauges for "in process" outside diameter measurements. The idea is to feed the output of the gauges as a fixed 50% duty cycle variable frequency signal to the mesa board. The main concern to decide my configuration is: Is there a 7i53 like board that uses the SERIAL I/O interface instead of the 50 pin connector? Thanks as always for your help. Leonardo
Do you mean a SSerial card with multiple encoders/frequency counters? A 7I90 could probably be convinced to do that
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace Mesa Electronics _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
