On Fri, 20 Jun 2025, Viesturs L?cis wrote:
Date: Fri, 20 Jun 2025 19:34:30 +0300 From: "[UTF-8] Viesturs L?cis" <viesturs.la...@gmail.com> Reply-To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Subject: [Emc-users] Firmware for 5i24 board (to: PCW)Hello! Most probably this is a question for Peter: I have been fighting with encoder counting and analog output issues for quite some time in the retrofit I have done. I have replaced several 7i48/7i33 boards, last of them was installed last week. And still encoder channels 4 and 5 did not respond at all, encoder channel 2 reads total nonsense. Long story short - I flashed 5i24 board with 5i24_16_sv12im_2x7i48 firmware, moved 7i48 board to P3 connector and channel 4 works like a charm. I have 1x 7i48, 1x 7i37 and 1x 7i44 attached to 5i24 board. I can live without 7i37 (I can attach 7i84 to 7i44 instead). Unfortunately 5i24_16_sv12im_2x7i48 firmware does not have sserial channels. The question is - is there existing firmware I can use for 7i48 (or 7i33) board on P3 and 7i44 on P2 (or vice versa)? Or do I need something special (and can I get something? Pretty pretty please)? Viesturs
I'll take a look at this later today Is it possible you have a bad/damaged 5I24? That is, does one connector not work properly?
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace Mesa Electronics _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
