On 12/22/25 08:57, andy pugh wrote:
On Mon, 22 Dec 2025 at 01:57, John Dammeyer<[email protected]> wrote:
If I understand the doc's it goes back to the starting Z position.
It does, and does not seem to consider retract mode (G98/99)
The G80 is needed )or, at least, advisable), as if you try doing (for example)
M3 S100
G33.1 Z-10 K1
X10 K1
The X move will also be spindle-synced and will return to the starting point.
Hmm, interesting! I have a G01 Z move after the G33.1 move
just to make sure the drill/tap is clear above the work
before the XY move to the next hole.
Jon
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
