piektd., 2026. g. 20. nov., plkst. 02:03 — lietotājs Rene Hopf via
Emc-users (<[email protected]>) rakstīja:
>
> try master, you are using large pocket numbers, which is broken in 2.9.
> I have retrofited a machine like yours, and I did the toolchanger
> entirely in HAL, and XY offsets in the tooltable:
> https://github.com/rene-dev/linuxcnc-configs/blob/master/maw/tools.comp
>

Just a little note - this is not the first retrofit where I remap M6
to ngc routine and it worked correctly previously (this config
actually is adjusted copy from previous retrofit, tool no 999 in tool
table actually was on previous machine). The only difference is that
previously there were tool posts under cover on the side of work area,
now there is a 7-seat servo-driven rotating plate that holds the tools
(principle looks like this:
https://miro.medium.com/v2/resize:fit:1200/0*5i_2tyGusjS-lnVa.jpg).
I looked at your component and it seems to me that it selects first
spindle when T26 is required and selects second spindle when T27 is
selected. Is that correct? If so, it seems that this component will
not handle changing between several tools in (usually first if there
are multiple) spindle.

Anyways, is it really likely that some glitch with pocket numbers
would give an error while loading a file but still execute the same
command in MDI? Are they parsed through different components or
something like that? I do not know the internals in that much detail.

Viesturs


_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to