Steven H. Smith wrote:
> Can anyone point me to a solution for running entrance on CentOS release
> 4.3?
> 
> I've changed:
> 
>    /etc/sysconfig/desktop to reflect DESKTOP="E17"
> 
>    /etc/X11/prefdm to reflect 
>       
>        elif [ "$DISPLAYMANAGER" = E17 ]; then
>                 preferred=/usr/local/sbin/entranced
> 
>    
> 
> but no entrance on start.
> 
> Thanks
> 
> SHS
> 
Im not familiar with your O/S but did you try Greg Kriehn's suggestions,
perhaps they will help.  We
are dealing with FC5 where X is at /usr/bin/X & the Xsession file
resides in /etc/X11/xinit Is that your case?

from Greg's post:

> BACKGROUND:
>>>>
>>>> 1.)  Configuration for /etc/entrance_config.cfg
>>>>
>>>> Currently, entrance is setup for a system that still uses X11R6 from
>>>> "X.org" instead of the new X11R7 files.  You can check this with the
>>>> following command:
>>>>
>>>>      sudo ecore_config -c /etc/entrance_config.cfg -a
>>>>
>>>> Look at the last line.  If will say:
>>>>
>>>>      /entranced/xserver string "/usr/X11R6/bin/X -quiet -nolisten tcp
>>>>      vt7"
>>>>
>>>> Because of this, entrance will not launch successfully.  It certainly
>>>> tries, as can be verified by checking your /var/log/messages file, but
>>>> fails because "X.org" uses X11R7 under FC5.  Notice the release notes of
>>>> Fedora Core 5.  See the third point, in particular.
> -----
>>>>
>>>> As you know, this has caused many headaches for people (including
>>>> myself), because developers for particular packages have not had time to
>>>> change their source code before the release of FC5.  Specific to
>>>> entrance, notice that it looks for "X" in "/usr/X11R6/bin" instead of in
>>>> "/usr/bin", where everything is now installed.  But this can easily be
>>>> fixed.  Simply run the command:
>>>>
>>>>    sudo ecore_config -c /etc/entrance_config.cfg -k /entranced/xserver
>>>>     -s "usr/bin/X -quiet -nolisten tcp vt7"
>>>>
>>>> Now run:
>>>>
>>>>    sudo ecore_config -c /etc/entrance_config.cfg -a
>>>>
>>>> The last line should now say:
>>>>
>>>>    /entranced/xserver  string  "usr/bin/X -quiet -nolisten tcp vt7"
>>>>
>>>> You are now capable of running entrance in FC5.  But only if
>>>> the /etc/entrance_config.cfg file is not changed again.  It would be
>>>> good to set this up so that when entrance is installed on FC5, it points
>>>> to the proper directory automatically.

> 2.)  Location of the Xsession file.
>>>>
>>>> Previously in FC4, "Xsession" could be found in only one location:
>>>> "/etc/X11/xdm/Xsession".  With FC5, things have gotten a bit more
>>>> complicated.  There are now two locations: "/etc/X11/xdm/Xsession" and
>>>> "/etc/X11/xinit/Xsession".  Both "gdm" and "kdm" (when launching a gnome
>>>> or kde session, respectively) are pointed to look at
>>>> "/etc/X11/xinit/Xsession", which is where the old "Xsession" file from
>>>> FC4 is now located (with some minor changes).  "/etc/X11/xdm/Xsession"
>>>> contains a new file that is specific to only "xdm" and is very sparse.
>>>> However, when entrance launches an enlightenment session, it still looks
>>>> for configuration info in "/etc/X11/xdm/Xsession", not
>>>> "/etc/X11/xinit/Xsession".  Check "/var/log/messages" to verify this.
>>>> For enlightenment, this causes problems because dbus (the messagebus
>>>> daemon) information will not be configured due to the major differences
>>>> between the two files, among other things.
>>>>
>>>> Theoretically, we could just copy "/etc/X11/xdm/Xsession" to
>>>> "/etc/X11/xdm/Xsession.bak" and then force a soft link from
>>>> "/etc/X11/xinit/Xsession" to "/etc/X11/xdm/Xsession", but this is a
>>>> hack, and a poor one at that.  It would be much better to have entrance
>>>> set up so that it looks at "/etc/X11/xinit/Xsession" instead for FC5.
>>>> Then entrance and enlightenment can both be launched properly.
>>>>
>>>> Can one of the developers perhaps update the "configure" script for
>>>> entrance to reflect the new changes so that it will work robustly with
>>>> both X11R6 and X11R7?




-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Reply via email to