Andy

DISPLAYMANAGER="E17" not DESKTOP="E17" was the culprit.

Thanks for the link

Steve

On Sat, 2006-08-26 at 22:33 -0700, Andrew Grimberg wrote:
> Steven,
> 
> You might want to take a look at the instructions available here:
> http://sps.nus.edu.sg/~didierbe/share/setup_entrance_fc4.txt for CentOS
> as Cent 4.3 most closely resembles FC4 and not FC5.
> 
> -Andy-
> 
> On Sat, 2006-08-26 at 23:53 -0500, Steven H. Smith wrote:
> > Yes, actually I did look at Greg's suggestions.  Your thread is what
> > spurred me to try and act on the entrance issue.  
> > 
> > CentOS is a free binary distribution of freely available Red Hat EL
> > source.  So I thought your FC solutions may help, but no such luck.  FC
> > is more bleeding edge.  CentOS is still using X116.
> > 
> > Thanks
> > 
> > SHS
> > 
> > On Sat, 2006-08-26 at 23:21 -0500, Laurence Vanek wrote:
> > > Steven H. Smith wrote:
> > > > Can anyone point me to a solution for running entrance on CentOS release
> > > > 4.3?
> > > > 
> > > > I've changed:
> > > > 
> > > >    /etc/sysconfig/desktop to reflect DESKTOP="E17"
> > > > 
> > > >    /etc/X11/prefdm to reflect 
> > > >       
> > > >        elif [ "$DISPLAYMANAGER" = E17 ]; then
> > > >                 preferred=/usr/local/sbin/entranced
> > > > 
> > > >    
> > > > 
> > > > but no entrance on start.
> > > > 
> > > > Thanks
> > > > 
> > > > SHS
> > > > 
> > > Im not familiar with your O/S but did you try Greg Kriehn's suggestions,
> > > perhaps they will help.  We
> > > are dealing with FC5 where X is at /usr/bin/X & the Xsession file
> > > resides in /etc/X11/xinit Is that your case?
> > > 
> > > from Greg's post:
> > > 
> > > > BACKGROUND:
> > > >>>>
> > > >>>> 1.)  Configuration for /etc/entrance_config.cfg
> > > >>>>
> > > >>>> Currently, entrance is setup for a system that still uses X11R6 from
> > > >>>> "X.org" instead of the new X11R7 files.  You can check this with the
> > > >>>> following command:
> > > >>>>
> > > >>>>      sudo ecore_config -c /etc/entrance_config.cfg -a
> > > >>>>
> > > >>>> Look at the last line.  If will say:
> > > >>>>
> > > >>>>      /entranced/xserver string "/usr/X11R6/bin/X -quiet -nolisten tcp
> > > >>>>      vt7"
> > > >>>>
> > > >>>> Because of this, entrance will not launch successfully.  It certainly
> > > >>>> tries, as can be verified by checking your /var/log/messages file, 
> > > >>>> but
> > > >>>> fails because "X.org" uses X11R7 under FC5.  Notice the release 
> > > >>>> notes of
> > > >>>> Fedora Core 5.  See the third point, in particular.
> > > > -----
> > > >>>>
> > > >>>> As you know, this has caused many headaches for people (including
> > > >>>> myself), because developers for particular packages have not had 
> > > >>>> time to
> > > >>>> change their source code before the release of FC5.  Specific to
> > > >>>> entrance, notice that it looks for "X" in "/usr/X11R6/bin" instead 
> > > >>>> of in
> > > >>>> "/usr/bin", where everything is now installed.  But this can easily 
> > > >>>> be
> > > >>>> fixed.  Simply run the command:
> > > >>>>
> > > >>>>    sudo ecore_config -c /etc/entrance_config.cfg -k 
> > > >>>> /entranced/xserver
> > > >>>>     -s "usr/bin/X -quiet -nolisten tcp vt7"
> > > >>>>
> > > >>>> Now run:
> > > >>>>
> > > >>>>    sudo ecore_config -c /etc/entrance_config.cfg -a
> > > >>>>
> > > >>>> The last line should now say:
> > > >>>>
> > > >>>>    /entranced/xserver  string  "usr/bin/X -quiet -nolisten tcp vt7"
> > > >>>>
> > > >>>> You are now capable of running entrance in FC5.  But only if
> > > >>>> the /etc/entrance_config.cfg file is not changed again.  It would be
> > > >>>> good to set this up so that when entrance is installed on FC5, it 
> > > >>>> points
> > > >>>> to the proper directory automatically.
> > > 
> > > > 2.)  Location of the Xsession file.
> > > >>>>
> > > >>>> Previously in FC4, "Xsession" could be found in only one location:
> > > >>>> "/etc/X11/xdm/Xsession".  With FC5, things have gotten a bit more
> > > >>>> complicated.  There are now two locations: "/etc/X11/xdm/Xsession" 
> > > >>>> and
> > > >>>> "/etc/X11/xinit/Xsession".  Both "gdm" and "kdm" (when launching a 
> > > >>>> gnome
> > > >>>> or kde session, respectively) are pointed to look at
> > > >>>> "/etc/X11/xinit/Xsession", which is where the old "Xsession" file 
> > > >>>> from
> > > >>>> FC4 is now located (with some minor changes).  
> > > >>>> "/etc/X11/xdm/Xsession"
> > > >>>> contains a new file that is specific to only "xdm" and is very 
> > > >>>> sparse.
> > > >>>> However, when entrance launches an enlightenment session, it still 
> > > >>>> looks
> > > >>>> for configuration info in "/etc/X11/xdm/Xsession", not
> > > >>>> "/etc/X11/xinit/Xsession".  Check "/var/log/messages" to verify this.
> > > >>>> For enlightenment, this causes problems because dbus (the messagebus
> > > >>>> daemon) information will not be configured due to the major 
> > > >>>> differences
> > > >>>> between the two files, among other things.
> > > >>>>
> > > >>>> Theoretically, we could just copy "/etc/X11/xdm/Xsession" to
> > > >>>> "/etc/X11/xdm/Xsession.bak" and then force a soft link from
> > > >>>> "/etc/X11/xinit/Xsession" to "/etc/X11/xdm/Xsession", but this is a
> > > >>>> hack, and a poor one at that.  It would be much better to have 
> > > >>>> entrance
> > > >>>> set up so that it looks at "/etc/X11/xinit/Xsession" instead for FC5.
> > > >>>> Then entrance and enlightenment can both be launched properly.
> > > >>>>
> > > >>>> Can one of the developers perhaps update the "configure" script for
> > > >>>> entrance to reflect the new changes so that it will work robustly 
> > > >>>> with
> > > >>>> both X11R6 and X11R7?
> > > 
> > > 
> > > 
> > -------------------------------------------------------------------------
> > Using Tomcat but need to do more? Need to support web services, security?
> > Get stuff done quickly with pre-integrated technology to make your job 
> > easier
> > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > _______________________________________________ enlightenment-users mailing 
> > list enlightenment-users@lists.sourceforge.net 
> > https://lists.sourceforge.net/lists/listinfo/enlightenment-users
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________ enlightenment-users mailing 
> list enlightenment-users@lists.sourceforge.net 
> https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Attachment: smime.p7s
Description: S/MIME cryptographic signature

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Reply via email to