I always like to use static so that the network is deterministic set lacp static lag.0.3 key 3333 ge.1.20-24 set lacp static lag.0.4 key 4444 ge.2.20-24 set vlan egress 1000 ge.1.20-24;lag.0.3-4 tagged set vlan egress 1001 ge.1.20-24;lag.0.3-4 tagged set port alias lag.0.3 'SwA' set port alias lag.0.4 'SwB' set port alias ge.1.20-24 'lag.0.3' set port alias ge.2.20-24 'lag.0.4' save config Matt Clark
IT Engineer Pinal County Information Technology Office: 520.866.6650 | Mobile: 520.705.1575 | FAX: 520.866.2911 Please take a moment to fill out the survey regarding this inquiry / experience with our department. http://pinalcountyaz.gov/Departments/InformationTechnology/Surveys/NetworkInfrastructure-CustomerSurvey.aspx >>> From: "Kotikov, Vasily" <[email protected]> To:"Enterasys Customer Mailing List" <[email protected]> Date: 9/20/2010 9:11 AM Subject: RE:[enterasys] Lacp config Hi, Do you use LACP or static? how do you create lags? Please, provide some input. Thanks From: [email protected] [mailto:[email protected]] On Behalf Of Greer, Paul Sent: Monday, September 20, 2010 7:04 PM To: Enterasys Customer Mailing List Subject: [enterasys] Lacp config I would like to setup lag ports for each building on our campus. Each building is connected to our N3 via gbic port. I have one Lag working from our N3 to a C3 but when I attempt to connect another building no new Lag is being built. This second building is on a B3. any ideas or thoughts? Thanks Paul Paul Greer Information Technology Services South Puget Sound Community College 2011 Mottman Rd Sw Olympia, WA 98512 360-596-5324 [email protected] --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
