Do a show port advertise ge.x.x Do you have a config You may want to set flowcontrol disable
Or Clear port advertise # speed 10t for example and do this until they link properly ( you can even start with the gig speed Jason On Sep 23, 2010, at 12:31 PM, Mike Hall <[email protected]<mailto:[email protected]>> wrote: I was wondering if this community can help me (again). I recently installed my 1st C3 and one user is complaining that his internet is too slow. He has a Linksys router hanging off the port and several PC’s off this router running DHCP, (his subnet 1.1). I changed his port and he still says his network is slow. I brought my laptop and did a speed test from a port off his router and got 16mbps down and 4mbps up. I looked at his port (which is ge.1.2) on the C3 and it looks like what I pasted below. He says his network was much faster before we installed the Enterasys. He used to have DSL directly into his router. I pasted the only commands I know to test his port below. However, I tried the command “sh port cable ge.1.2”, and it says “not supported”. I don’t know why it says “not supported”. Does anyone know why his network might be slow on the Enterasys ? Thanks!! 3(su)->show system utilization CPU Utilization Threshold Traps enable: Threshold = 80.0% Total CPU Utilization: Switch CPU 5 sec 1 min 5 min ------------------------------------------------- 1 1 1% 0% 0% Switch:1 CPU:1 TID Name 5Sec 1Min 5Min ---------------------------------------------------------- 2db8d20 tNetTask 0.00% 0.10% 0.03% 2dc2630 tXbdService 0.00% 0.00% 0.02% 2fbced0 ipnetd 0.40% 0.06% 0.01% 577d428 lvl7TaskUtilMonitorTas 0.40% 0.40% 0.40% 6228f60 tEmWeb 0.00% 0.00% 0.01% 6edd6b0 EDB BXS Req 0.00% 0.00% 0.21% 6eeeba8 EDB BXS Resp 0.40% 0.06% 0.02% 7034618 RMONTask 0.00% 0.09% 0.11% 9fe3308 ipMapForwardingTask 0.00% 0.00% 0.01% b9c8c98 poe_read 0.00% 0.00% 0.05% ba4f480 poe_monitor 0.00% 0.00% 0.02% Storage Utilization: Type Description Size(Kb) Available (Kb) --------------------------------------------------------------- RAM RAM device 262140 50609 Flash Images, Config, Other 31612 21834 C3(su)-> C3(su)->show port spee default speed is 1000 on port ge.1.1 default speed is 1000 on port ge.1.2 default speed is 1000 on port ge.1.3 default speed is 1000 on port ge.1.4 default speed is 1000 on port ge.1.5 default speed is 1000 on port ge.1.6 default speed is 1000 on port ge.1.7 default speed is 1000 on port ge.1.8 default speed is 1000 on port ge.1.9 default speed is 1000 on port ge.1.10 default speed is 1000 on port ge.1.11 default speed is 100 on port ge.1.12 default speed is 1000 on port ge.1.13 default speed is 1000 on port ge.1.14 default speed is 1000 on port ge.1.15 default speed is 1000 on port ge.1.16 default speed is 1000 on port ge.1.17 default speed is 1000 on port ge.1.18 default speed is 1000 on port ge.1.19 default speed is 1000 on port ge.1.20 default speed is 1000 on port ge.1.21 default speed is 1000 on port ge.1.22 default speed is 1000 on port ge.1.23 default speed is 1000 on port ge.1.24 C3(su)->show port cou Port : ge.1.1 MIB2 Interface: 1 Bridge Port : 1 Counter Discontinuity: 0 days 1 hours 25 minutes 10 seconds ago ----------------------------------------------------------------- MIB2 Interface Counters ----------------------- In Octets 800377 In Unicast Pkts 3538 In Multicast Pkts 0 In Broadcast Pkts 140 In Discards 0 In Errors 0 Out Octets 4326842 Out Unicast Pkts 4190 Out Multicast Pkts 2820 Out Broadcast Pkts 105 Out Errors 0 802.1Q Switch Counters ---------------------- Frames Received 3678 Frames Transmitted 7115 Port : ge.1.2 MIB2 Interface: 2 Bridge Port : 2 Counter Discontinuity: 0 days 1 hours 25 minutes 10 seconds ago ----------------------------------------------------------------- MIB2 Interface Counters ----------------------- In Octets 3610 In Unicast Pkts 5 In Multicast Pkts 0 In Broadcast Pkts 10 In Discards 0 In Errors 0 Out Octets 373722 Out Unicast Pkts 5 Out Multicast Pkts 2845 Out Broadcast Pkts 240 Out Errors 0 802.1Q Switch Counters ---------------------- Frames Received 15 Frames Transmitted 3090 Port : ge.1.3 MIB2 Interface: 3 Bridge Port : 3 Counter Discontinuity: 0 days 1 hours 25 minutes 10 seconds ago * --To unsubscribe from enterasys, send email to <mailto:[email protected]> [email protected]<mailto:[email protected]> with the body: unsubscribe enterasys [email protected]<mailto:[email protected]> --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
