Hi guys,
Hopefully a very basic question for someone.
With HP NIC Teaming on Windows 2008 R2, we've been advised that "Switch
assisted load balancing with fault tolerance (SLB)" is the best option for a
NIC team connected to an Enterasys C2G stack, provided we manually create
the LAG.
I've created the LAG as follows:
set lacp aadminkey lag.0.2 102
set port lacp port ge.3.35 aadminkey 102
set port lacp port ge.3.45 aadminkey 102
I've done quite a few switch-to-switch LAG's so am familiar with seeing
entries under "Attached ports" when the LAG is active but this one shows
none:
================================================
C2Stack(su)->show lacp lag.0.2
Global Link Aggregation state: enabled
Single Port LAGs: disabled
Aggregator: lag.0.2
Actor Partner
System Identifier: 00:11:88:64:7F:AA 18:A9:05:60:FA:10
System Priority: 32768 32768
Admin Key: 102
Oper Key: 102 768
Attached Ports: None.
C2Stack(su)->
================================================
The partner Mac address is the Mac address of the Team, but the question is
- should I be seeing ge.3.35 and ge.3.45 as "Attached Ports:" if it's
functioning correctly?
These ports are in VLAN 100 by the way, so I've also made sure the same VLAN
can egress the lag:
set vlan egress 100 ge.1.36-46;lag.0.2 untagged
Thanks,
Nick.
--
This e-mail is intended only for the named person or entity to which it is
addressed and
contains valuable business information that is proprietary, privileged,
confidential and/or
otherwise protected from disclosure. If you received this e-mail in error, any
review, use,
dissemination, distribution or copying of this e-mail is strictly prohibited.
Please notify
us immediately of the error via e-mail to [email protected] and
please delete
the e-mail from your system, retaining no copies in any media. We appreciate
your cooperation.
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]
