Hi Stephen,
You're right - selecting that option does indeed bring the lag up.
Honestly, I did think that was a more logical option, but we were
recommended to use the switch assisted one, so I think I'll safely ignore
that comment and stick with your advice!
Thanks for your input and Happy Christmas to all on the list that that's
applicable to!
Cheers,
N.
C2Stack(su)->show lacp lag.0.2
Global Link Aggregation state: enabled
Single Port LAGs: disabled
Aggregator: lag.0.2
Actor Partner
System Identifier: 00:11:88:64:7F:AA 18:A9:05:60:FA:10
System Priority: 32768 32768
Admin Key: 102
Oper Key: 102 768
Attached Ports: ge.3.35
ge.3.45
C2Stack(su)->
On 23 December 2010 21:38, Stephen Wilson <[email protected]> wrote:
> Nick,
>
>
>
> You are correct, you should see the ports as attached if the team were in
> fact functioning. I believe the load-balance method you’re looking for on
> the server side is 802.3ad Dynamic with Fault Tolerance. The SLB is for
> using aggregated links that do not support LACP (i.e. EtherChannel), whereas
> 802.3ad will enable LACP on the server side and should bring the lag up.
>
>
>
> Stephen Wilson
>
> Network Manager
>
> Western Carolina University
>
> 828-227-3215
>
>
>
> [image: Description: jn_certified_associate_rgb]
>
>
>
> *From:* Nick Allen [mailto:[email protected]]
> *Sent:* Thursday, December 23, 2010 2:28 PM
>
> *To:* Enterasys Customer Mailing List
> *Subject:* Re: [enterasys] HP NIC Teaming...
>
>
>
> Hi Jay,
>
>
>
> Sorry - yes typo:
>
>
>
> set vlan egress 100 ge.3.35;ge.3.45;lag.0.2 untagged
>
>
>
> Cheers,
>
>
>
> N.
>
> On 23 December 2010 18:48, Auger, Jay (IS) <[email protected]> wrote:
>
> Just want to make sure, in your lacp commands you reference ports ge.3.35 &
> ge.3.45 but in your VLAN egress statement you reference ge.3.36 & ge.3.46.
> Hopefully, this is just a typo.
>
> Jay
> ________________________________________
> From: Nick Allen [[email protected]]
> Sent: Thursday, December 23, 2010 1:33 PM
> To: Enterasys Customer Mailing List
> Subject: [enterasys] HP NIC Teaming...
>
> Hi guys,
>
> Hopefully a very basic question for someone.
>
> With HP NIC Teaming on Windows 2008 R2, we've been advised that "Switch
> assisted load balancing with fault tolerance (SLB)" is the best option for a
> NIC team connected to an Enterasys C2G stack, provided we manually create
> the LAG.
>
> I've created the LAG as follows:
>
> set lacp aadminkey lag.0.2 102
> set port lacp port ge.3.35 aadminkey 102
> set port lacp port ge.3.45 aadminkey 102
>
> I've done quite a few switch-to-switch LAG's so am familiar with seeing
> entries under "Attached ports" when the LAG is active but this one shows
> none:
>
> ================================================
> C2Stack(su)->show lacp lag.0.2
> Global Link Aggregation state: enabled
> Single Port LAGs: disabled
>
> Aggregator: lag.0.2
> Actor Partner
> System Identifier: 00:11:88:64:7F:AA 18:A9:05:60:FA:10
> System Priority: 32768 32768
> Admin Key: 102
> Oper Key: 102 768
> Attached Ports: None.
> C2Stack(su)->
>
> ================================================
>
> The partner Mac address is the Mac address of the Team, but the question is
> - should I be seeing ge.3.35 and ge.3.45 as "Attached Ports:" if it's
> functioning correctly?
>
> These ports are in VLAN 100 by the way, so I've also made sure the same
> VLAN can egress the lag:
>
> set vlan egress 100 ge.1.36-46;lag.0.2 untagged
>
> Thanks,
>
> Nick.
>
>
> --
> This e-mail is intended only for the named person or entity to which it is
> addressed and
> contains valuable business information that is proprietary, privileged,
> confidential and/or
> otherwise protected from disclosure. If you received this e-mail in error,
> any review, use,
> dissemination, distribution or copying of this e-mail is strictly
> prohibited. Please notify
> us immediately of the error via e-mail to [email protected] and
> please delete
> the e-mail from your system, retaining no copies in any media. We
> appreciate your cooperation.
>
>
>
>
>
>
> * --To unsubscribe from enterasys, send email to [email protected]
> <mailto:[email protected]> with the body: unsubscribe enterasys
> [email protected]
>
>
>
>
> ---
> To unsubscribe from enterasys, send email to [email protected] with the
> body: unsubscribe enterasys [email protected]
>
>
>
>
> --
>
>
>
>
>
> Nick Allen
> IT Director
> TBWA\UK GROUP
>
> 76-80 Whitfield Street
> London, W1T 4EZ
>
> Direct: +44 20 7573 6792
> Mobile: +44 7970 121 609
> Main: +44 20 7573 6500
>
> Reg. Office: TBWA UK GROUP Ltd, 239 Old Marylebone Road, London, NW1 5QT
> Company Reg. #: 4332188 (UK)
> Company VAT #: GB 656 8994 61
>
>
>
>
>
> --
>
> This e-mail is intended only for the named person or entity to which it is
> addressed and
>
> contains valuable business information that is proprietary, privileged,
> confidential and/or
>
> otherwise protected from disclosure. If you received this e-mail in error,
> any review, use,
>
> dissemination, distribution or copying of this e-mail is strictly prohibited.
> Please notify
>
> us immediately of the error via e-mail to [email protected] and
> please delete
>
> the e-mail from your system, retaining no copies in any media. We appreciate
> your cooperation.
>
>
>
>
>
>
>
> · --To unsubscribe from enterasys, send email to [email protected]
> with the body: unsubscribe enterasys [email protected]
>
> ·
>
>
>
> - --To unsubscribe from enterasys, send email to [email protected] with
> the body: unsubscribe enterasys [email protected]
>
>
--
Nick Allen
IT Director
TBWA\UK GROUP
76-80 Whitfield Street
London, W1T 4EZ
Direct: +44 20 7573 6792
Mobile: +44 7970 121 609
Main: +44 20 7573 6500
Reg. Office: TBWA UK GROUP Ltd, 239 Old Marylebone Road, London, NW1 5QT
Company Reg. #: 4332188 (UK)
Company VAT #: GB 656 8994 61
--
This e-mail is intended only for the named person or entity to which it is
addressed and
contains valuable business information that is proprietary, privileged,
confidential and/or
otherwise protected from disclosure. If you received this e-mail in error, any
review, use,
dissemination, distribution or copying of this e-mail is strictly prohibited.
Please notify
us immediately of the error via e-mail to [email protected] and
please delete
the e-mail from your system, retaining no copies in any media. We appreciate
your cooperation.
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]
