Hi Christian, please try to create the user "public" again, which is cleared out, even if the community public is still persistant. The snmp targetparams is using the user "public", which will be included in the trap information. I think, if the user doesn't exist, no trap is sent (even if SNMPv1, it needs the user, the community is not enough).
Please try this out an let me know. Btw, do you have NetSight Suite/Console running on any machine? Do you use NetSight syslog or/and trap receiver, or any other? Need to know for SNMPv3 as well, because you need to configure the right credentials on syslog and trap receiver, to be able to read and encrypt the SNMP packets if authentication and encryption is used for SNMPv3 packts. Hope this helps. Cheers, Markus Sent via iPhone. On 10.01.2011, at 21:07, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> wrote: Hi, I think something is missing ... but I don't know what; I'm trying to configure our A2 and N3 System to report failures via SNMP to a Managment Station with Syslog and SNMP Trap reciever. Syslog is working, but if I try to configure SNMP Traps (starting with v1, I want to you use V3 Inform, but test actually with v1) nothing happens :-) No SNMP packet on tcpdump, only the syslog packet :-( I'm disconecting a cable to create a trap, but only the syslog info is shown. I try to configure it like the Doc "Configure SNMP" (28. July 2008) page 10 A2 - Firmware Revision: 02.01.10.0001 Here is a part from the config .... #logging set logging default severity 7 set logging application CLIWEB level 7 set logging application SNMP level 7 set logging application STP level 7 set logging application Driver level 7 set logging application System level 7 set logging application Stacking level 7 set logging local console enable file enable set logging server 1 ip-addr 192.168.1.10 descr 'test' state enable ! set snmp access ro security-model v1 exact read All notify All nonvolatile clear snmp access ro security-model v2c clear snmp access public security-model v1 clear snmp access public security-model v2c clear snmp access public security-model usm set snmp community :hsh for public : set snmp group ro user public security-model v1 clear snmp group ro ro security-model v1 clear snmp group ro ro security-model v2c set snmp notify traptag tag Trap set snmp targetaddr taddrpublic 192.168.1.10 param tparapublic taglist traptag set snmp targetparams tparapublic user public security-model v1 message-processing v1 noauthentication nonvolatile clear snmp user public set snmp view viewname All subtree 1 set snmp view viewname All subtree 0.0 ---------------------- Link trap is enabled on all ports. I think their is only a little error or I'm completly wrong .... Thanks in advance for your help, I'm now leaving frustrated, good night Christian J. Janßen EK-T-SIT Telefon +49 2151 38-4711 Telefax +49 2151 38-3941 <mailto:[email protected]>[email protected]<mailto:[email protected]> Evonik Stockhausen GmbH Bäkerpfad 25 47805 Krefeld www.evonik.de<http://www.evonik.de/> Aufsichtsratsvorsitzender: Dr. Claus Rettig Geschäftsführung: Peter Petit (Sprecher), Willibrord Lampen Sitz der Gesellschaft ist Krefeld Registergericht: Amtsgericht Krefeld; Handelsregister HRB 5791 * --To unsubscribe from enterasys, send email to <mailto:[email protected]> [email protected]<mailto:[email protected]> with the body: unsubscribe enterasys [email protected]<mailto:[email protected]> --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
