Hi All;
I have upgraded my C3G124-48P Switches to 06.42.10.0016.
After the upgrade my Switch started losing connectivity to the DHCP, I will
ping the DHCP server, Some users and phones will not get ip addresses.
But if you configure a static IP address on the laptop then you can connect
fine.
I have downgraded the Firmware to 06.42.09.0005, and it seems to be fine. I
have 6 different other stacks running 06.42.10.0016 that seems to be running
fine, but I am afraid they might start experiencing the same issues also.
When this happens the logs do not sure anything.
I am not sure if this is a hardware issue on my current stack.
Please help ASAp.
Command Centre(su)->show switch
Management Preconfig Plugged-in Switch Code
Switch Status Model ID Model ID Status Version
------ ------------ ----------- ----------- --------------------- --------------
1 Mgmt Switch C3G124-48P C3G124-48P OK 06.42.09.0005
2 Stack Member C3G124-48P C3G124-48P OK 06.42.09.0005
Command Centre(su)->
Command Centre(su)->
Command Centre(su)->show ver
Model Serial # Versions
-------------- ----------------- -------------------
C3G124-48P 09441257225K Hw:BCM56504 REV 19
Bp:01.00.52
Fw:06.42.09.0005
BuFw:06.42.10.0016
PoE:608_3
CPLD:2.0
C3G124-48P 09441255225K Hw:BCM56504 REV 19
Bp:01.00.52
Fw:06.42.09.0005
BuFw:06.42.10.0016
PoE:608_3
CPLD:2.0
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]
