I just looked through the S-series CLI reference document and it's the same as the N-Series code.
This is the command which should be entered under each layer three interface needing the DHCP relay ip helper-address DHCP Server address Thanks, Jason Rearick Network Engineer Home Office: Info Center Utica National Insurance Group P.O. Box 530 Utica, NY 13503 Email: [email protected] Phone:315-734-2704 From: James Andrewartha <[email protected]> To: "Enterasys Customer Mailing List" <[email protected]>, Date: 03/08/2012 11:15 PM Subject: Re: [enterasys] DHCP relay on S4 On 01/03/12 15:17, James Andrewartha wrote: > Hi all, > > Has anyone done BSDP relay? I've configured our S4 to be a relay, or so > I hope, but I'm not seeing any packets being directed towards the BSDP > server. My config is as follows: So forget about BSDP relay, how do I get DHCP relay to work on an S4? -- James Andrewartha Network & Projects Engineer Christ Church Grammar School Claremont, Western Australia Ph. (08) 9442 1757 Mob. 0424 160 877 --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
