> > "Gerry Morgan" <[EMAIL PROTECTED]> wrote:
> > ... I use my 630s with IS lenses (75-300 and 100-400), and
> > I haven't had any excessive shaking. ...
Julian Loke wrote:
>I am intrigued: Canon specs indicate that there is major
>viewfinder shake after each shutter release on the 630.
I just got my 630 and my 650 out of storage. I tested both bodies with both
my IS lenses: the 75-300 and the 100-400. There was no viewfinder shake
after shutter release (nor before shutter release). In all cases, the lens
was in autofocus mode, with IS switched on (of course).
>The loss of power to the IS unit also occurred with my
>EOS 1000FN whenever the popup flash was recharging. It
>was a major worry to hear the Image Stabilizer mechanism
>"clunking" in and out.
There was no such clunking with the 630 or 650. The IS mechanism appeared
to work just as well as with my EOS 3.
>Does your 630 exhibit ANY shaking?
>What happens during continuous wind?
There was no shaking with either the 630 or the 650, and the image remained
stable, even in continuous wind mode. The experiment served to remind me
how much faster the continuous wind mode is on the 630 than the 650.
Gerry
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
