Hi All, I installed ethereal from the nightly build of "ethereal-2004-01-26". As soon as I start capture of open a capture file, it crashes. I see a windows message pop up "The instruction at 0x10006fc2" referenced memory at 0x0000000
I also tried disabling "disable the SMB and Q.931 protocol dissectors by selecting Edit->Protocols..." but that too did not work. Any insight/help is appreciated. Guy, thanks for ur suggestion in earlier mail regarding installation problems. It indeed worked. Thanks ----- Original Message ----- From: "Guy Harris" <[EMAIL PROTECTED]> To: "Ethereal development" <[EMAIL PROTECTED]> Sent: Wednesday, January 28, 2004 11:28 PM Subject: Re: [Ethereal-dev] (no subject) > On Wed, Jan 28, 2004 at 09:31:23PM -0800, Parul Singla wrote: > > I'm facing installaion problems with the nightly build of > > "ethereal-2004-01-26" on cygwin. > > > > Attached are the config.nmake and Makefile.nmake. > > Try doing "nmake -f makefile.nmake clean", and then redoing the make > using an unmodified version of Makefile.nmake and a version of > config.nmake that's based on the one that came with the source release > and with a *minimum* number of changes (e.g., define ETHEREAL_LIBS as > C:\cygwin\usr\local, and change only those _DIR defines where you have a > different version of the library, e.g. ZLIB_DIR). > > Perhaps the modified config.nmake and Makefile.nmake *should* work, but > minimizing the number of changes from the standard configuration should > at least reduce the number of potential problems. > > _______________________________________________ > Ethereal-dev mailing list > [EMAIL PROTECTED] > http://www.ethereal.com/mailman/listinfo/ethereal-dev _______________________________________________ Ethereal-dev mailing list [EMAIL PROTECTED] http://www.ethereal.com/mailman/listinfo/ethereal-dev
