I wanted to copy the stack contents too (during crash), which I got after attaching ethereal to VC++.
Stack contents: ----------------- wtap_open_offline(const char * 0x01ae4b20, int * 0x0012eabc, int 0x0012eab8) line 266 + 11 bytes cf_open(char * 0x01ae4b20, int 0x00000001, _capture_file * 0x00c2ac60) line 153 + 19 bytes cf_start_tail(char * 0x01ae4b20, int 0x00000001, _capture_file * 0x00c2ac60) line 521 + 17 bytes do_capture(const char * 0x00000000) line 597 + 24 bytes capture_prep_ok_cb(_GtkWidget * 0x01ad38c8, void * 0x01ae05e8) line 1015 + 9 bytes LIBGTK-0! 6dc88a5c() LIBGTK-0! 6dcc362f() LIBGTK-0! 6dcc2bba() LIBGTK-0! 6dcc0a68() LIBGTK-0! 6dc0f7c4() LIBGTK-0! 6dc11683() LIBGTK-0! 6dc88a5c() LIBGTK-0! 6dcc2a88() LIBGTK-0! 6dcc0a68() LIBGTK-0! 6dc0f6e4() LIBGTK-0! 6dc10dca() LIBGTK-0! 6dc887ea() LIBGTK-0! 6dcc2bf0() LIBGTK-0! 6dcc0a68() LIBGTK-0! 6dd0a190() LIBGTK-0! 6dc879a1() LIBGTK-0! 6dc8754c() LIBGDK-0! 67fa5f79() LIBGLIB-2.0-0! 672de67e() LIBGLIB-2.0-0! 672dec9f() LIBGLIB-2.0-0! 672db959() LIBGTK-0! 6dc8712c() main(int 0x00000000, char * * 0x00c542cc) line 2564 WinMain(HINSTANCE__ * 0x00400000, HINSTANCE__ * 0x00000000, char * 0x00134834, int 0x0000000a) line 2684 + 23 bytes ETHEREAL! WinMainCRTStartup + 308 bytes KERNEL32! 7c5987e7() Thanks ----- Original Message ----- From: "Parul Singla" <[EMAIL PROTECTED]> To: "Ethereal development" <[EMAIL PROTECTED]> Sent: Thursday, January 29, 2004 5:59 PM Subject: [Ethereal-dev] Ethereal Crash in nightly build of"ethereal-2004-01-26" > Hi All, > I installed ethereal from the nightly build of "ethereal-2004-01-26". As > soon as I start capture of open a capture file, it crashes. I see a windows > message pop up "The instruction at 0x10006fc2" referenced memory at > 0x0000000 > > I also tried disabling "disable the SMB and Q.931 protocol dissectors by > selecting Edit->Protocols..." but that too did not work. > > Any insight/help is appreciated. > > Guy, thanks for ur suggestion in earlier mail regarding installation > problems. It indeed worked. > > Thanks > > > ----- Original Message ----- > From: "Guy Harris" <[EMAIL PROTECTED]> > To: "Ethereal development" <[EMAIL PROTECTED]> > Sent: Wednesday, January 28, 2004 11:28 PM > Subject: Re: [Ethereal-dev] (no subject) > > > > On Wed, Jan 28, 2004 at 09:31:23PM -0800, Parul Singla wrote: > > > I'm facing installaion problems with the nightly build of > > > "ethereal-2004-01-26" on cygwin. > > > > > > Attached are the config.nmake and Makefile.nmake. > > > > Try doing "nmake -f makefile.nmake clean", and then redoing the make > > using an unmodified version of Makefile.nmake and a version of > > config.nmake that's based on the one that came with the source release > > and with a *minimum* number of changes (e.g., define ETHEREAL_LIBS as > > C:\cygwin\usr\local, and change only those _DIR defines where you have a > > different version of the library, e.g. ZLIB_DIR). > > > > Perhaps the modified config.nmake and Makefile.nmake *should* work, but > > minimizing the number of changes from the standard configuration should > > at least reduce the number of potential problems. > > > > _______________________________________________ > > Ethereal-dev mailing list > > [EMAIL PROTECTED] > > http://www.ethereal.com/mailman/listinfo/ethereal-dev > > _______________________________________________ > Ethereal-dev mailing list > [EMAIL PROTECTED] > http://www.ethereal.com/mailman/listinfo/ethereal-dev _______________________________________________ Ethereal-dev mailing list [EMAIL PROTECTED] http://www.ethereal.com/mailman/listinfo/ethereal-dev
