Hello, thanks for the hints. Unfortunately I did not get the IO Link clamp to run with just the SDO configuration and I guess this isn't possible for this kind of configurable clamps.
However a viable way to work around was to pre-configure the EL6224 with TwinCAT and write the config (created with an .iodd device description from the end point RFID sensor) to the the clamp. Afterwards the PDO configuration derived by --skin etherlab looks completely different, but can be now used to retrieve the sensor information from the specific device. The configuration steps in TwinCAT/config mode have to be repeated after a restart of the clamp, which is a bit of a pitty (I guess IOLink commands are sent to set the sensor device to OP). I guess it would not very easy to implement the configuration into Simulink, but I'll leave it for now. Best regards, Sebastian -----Ursprüngliche Nachricht----- Von: Dr.-Ing. Wilhelm Hagemeister [mailto:h...@igh.de] Gesendet: Mittwoch, 27. Januar 2016 14:05 An: Rehberger, Sebastian <rehber...@ais.mw.tum.de>; etherlab-users@etherlab.org Betreff: Re: [etherlab-users] Beckhoff EL6224 IO-Link Hallo, copy the output of etherlab --skin etherlab -p xx to your m-file. Add sdo configuration as show in attached example. Call the m-file from an generic slave block. Attached an example for EL7041. Sometimes one has to examine the configuration from TwinCat. Regards Wilhelm. Am 26.01.2016 um 20:08 schrieb Rehberger, Sebastian: > Dear Etherlab Users, > > has anyone already used a Beckhoff EL6224 bus clamp? This is a IO-Link > terminal and we are having some RFID reader/writers connected to it. > > I recently tried to use the generic slave block for interfacing it, > but failed. I therefore generated the .m configuration file for the . > generic configuration with "--skin" option on command line. Any idea > how I should approach this? Thank you for any advice and help. > > Kind regards, > > Sebastian > > > > _______________________________________________ > etherlab-users mailing list > etherlab-users@etherlab.org > http://lists.etherlab.org/mailman/listinfo/etherlab-users > _______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users
